Charging method of polymer lithium ion battery:
When charging the battery of a mobile phone without electricity, the first thing to look for is the most suitable authentic charging head on the mobile phone. Otherwise, it will be very simple to cause the damage of the rechargeable battery when the battery is charged, or due to compatibility issues with the genuine charging head, etc. reason. Everyone knows that fast charging is applicable to mobile phones. If you do not have a unique and important application place, then it is best to use slow charging when charging the battery, so as to maximize the service life of the mobile phone.
If the mobile phone is not used for a long time, the polymer lithium ion battery must be fully charged first, and then the battery must be fully charged, and the battery does not need to be placed on the charging head. If the polymer lithium ion battery is not used for a long time, then It is very likely to cause the rechargeable battery to separate from the middle of the phone, thereby jeopardizing the phone configuration.
Repair and maintenance methods of polymer lithium ion battery:
1. First, the new battery is fully charged. Assuming that the recently purchased rechargeable batteries have to be fully charged before application, the battery charging operating voltages are generally close to each other and do not need to exceed the operating voltage. The battery must be charged and discharged after it is full, and it is best to maintain a small current when charging and discharging. The final job is to carry out automatic charging according to the steps described, and look back at the circulation system to ensure that it can be applied three times.
2. To avoid overcharging. There is a strict requirement for the selection of charging heads. If some charging heads are not fully charged, they will be powered off in the future. If the charging of the battery is not terminated after the charging is completed, it will cause unnecessary harm to the rechargeable battery. Will polymer lithium ion batteries explode?
In terms of safety factor, polymer lithium-ion battery is outsourcing decorative aluminum-plastic packaging and has a metal shell different from liquid lithium battery. According to the deformation of business outsourcing, internal quality and safety risks can be seen. Once a safety risk occurs, it is not easy to happen The explosion, just surging.
There are seven major differences between polymer lithium ion batteries and lithium ion batteries:
Related to lithium ion batteries, lithium polymer lithium batteries have the following characteristics:
1. Solid lithium battery electrolyte, no battery leakage.
2. Thin, can be made into very thin rechargeable batteries.
3. The rechargeable battery can be made into random shapes of various shapes.
4. Deformability, the rechargeable battery can be bent and deformed.
5. It can be made into a chip DC high voltage power supply.
6. Because there is no liquid by itself, it can produce a double-layer composition inside a piece to achieve high pressure.
7.Large volume, the volume will be twice the volume of the same volume of lithium battery.
Post time: Jul-21-2021
